014014.jpg)
The oval mirror frame was a fun project since I never made one. I had to figure this out for myself as I went along. The outside of the oval was the
easy part, after cutting the angles and glueing it up I just cut the out side
with the band saw and sanded the edges, then i had to cut the inside, this
frame is one inch oak too tough for my jig saw so I straped a band saw
blade around the out side and followed it with my router it worked out very
well.
easy part, after cutting the angles and glueing it up I just cut the out side
with the band saw and sanded the edges, then i had to cut the inside, this
frame is one inch oak too tough for my jig saw so I straped a band saw
blade around the out side and followed it with my router it worked out very
well.
014013.jpg)
All the parts to half bath are stained the
same the mirror frame, paper holder and base board trim.
same the mirror frame, paper holder and base board trim.
014010.jpg)
014012.jpg)
The glue up went
very well, the joints
are tight.
very well, the joints
are tight.
014011.jpg)
The finished mirror makes a nice addition to the half bath.
Oval Mirror Frame
The web's most complete resource center for woodworkers.
Get Your
